Cooling Skin Spray S5

• Cooling Skin Spray S is also suitable for injuries, especially to relieve muscle irritation.
• Cooling Skin Spray S is particularly aimed at refreshing and short-term cooling effects – for example, after showering.
• By intensively massaging in the Cooling Skin Spray S, heat is dissipated from the surrounding tissue. The heat is dissipated from the tissue by the thermobran© effect that develops in the uppermost layer of the skin and is released into the environment at a significantly higher rate than usual.
• The cool-down phase during exercise is one of the most crucial for initiating regeneration, cooling the body, and preventing post-exercise sweating. Cooling Skin Spray S can provide professional support here. It ensures that, when massaged into the affected muscle areas, cooling is induced and post-exercise sweating is significantly reduced.

When should Cooling Skin Spray S be used?

Ideal before and after workouts as a relaxing drink or for refreshment in between.

How often can the Cooling Skin Spray S be used?

The Cooling Skin Spray S can be used as often as desired. This will extend the duration of the effect, but not increase the cooling effect (intensity).

Do hands need to be cleaned after application? How can hands be cleaned after application?

After applying and massaging the spray, there's no need to clean your hands. It's designed to prevent any thermoactive effect on the palms.

Any product residue is best applied around the application site. This enhances the thermoactivity of the application. If you want to achieve a crisp application, you can also simply wash your hands with a cloth or water.

What effect does the product have after application to the hand?

In the palms of the hands – as well as on the soles of the feet – there are no thermoactive effects when applied and massaged in.

Can Cooling Shower & Shampoos be combined with Cooling Skin Sprays?

Yes, Cooling Shower & Shampoos andCooling Skin Sprayscan be combined. In this case, the duration of the effect is extended, but the cooling effect (intensity) is not increased.

What types of Cooling Skin Spray are there?

DYNADION Cooling Skin Spray is available in 2 orientations

1. Cooling Skin Spray S:

• Physical cooling effect (measured on the skin) begins after application

• at least –1°C, –3°C or –5°C for 30 minutes

• Cooling effect is felt after application, strength is perceived differently by each individual

• repeated application possible

2. Cooling Skin Spray L:

• Physical cooling effect (measured on the skin) begins after application

• Depending on the product variant, –1°C, –3°C or –5°C for 3 – 5 hours

• Cooling effect is felt after application, strength is perceived differently by each individual

• repeated application possible

Cooling Skin Spray S creates a biomimetic, skin-identical thermobran© microfilm in the uppermost layer of the skin. This microfilm consists of natural biopolymers and cools the surrounding skin tissue. The thermoactive biopolymer microfilm counteracts overheating and, above all, promotes performance.

The thermobran© microfilm is a carrier of active ingredients. You don't just feel cold like with conventional cold showers; instead, a measurable temperature difference is created on the skin, which regulates heat exchange with the environment and thus cools the tissues by dissipating heat to the outside.

In detail, this means: The thermobran© microfilm has a "heat-reflecting" effect, meaning it blocks heat absorption from the outside (thermal shield). It also releases moisture to the inside, allowing heat energy to be released from the body tissue to the outside more quickly than usual (thermal bridge).

Cooling Skin Spray S is colorless and hypoallergenic, meaning it poses no risk of irritation to the skin.

Cooling Skin Spray S is therefore extremely well tolerated and can be used as often as required. It can also be used near the eyes (without eye contact) or on open areas/wounds.

Physical cold effect (measured on the skin):

• begins with application,
• in this product variant up to 5°C colder,
• at least 30 minutes.

Cold effect felt:

• begins with application,
• Intensity (strength and duration) is perceived very differently by each individual.

Comparison of the cooling effect of conventional cooling preparations (e.g. rubbing alcohol, mountain pine oil):

• begins with application,
• no real, i.e. physically (on the skin) measurable cooling effects are achieved,
• purely sensory, i.e. only perceived cold perception,
• Duration of perception depends very much on skin type.

Cooling Skin Spray S also features pH-balance© technology: It buffers the skin's pH value in the neutral range of 5.5. This prevents the risk of sweat eczema associated with alkaline post-sweating.

The Cooling Skin Spray S is:

• breathable,
• sweat-resistant,
• (salt) water resistant and
• friction-resistant.